By casting light from the ceiling level, this type of lighting has the power to do a wide variety of jobs. Located above the sink, it provides task lighting. Placed throughout a ceiling, it offers clean, unobtrusive general lighting. When paired with 6" Electronic-NPF Compact Fluorescent Housing (PG1052) these trims meet Energy Star requirements.
FEATURES |
COMPATIBLE HOUSINGS
FEATURES
- Burnished Brass finish
- Aluminum flange
- Trim-LokŪ action forces trim to fit snugly against the ceiling
- Socket mounts to trim for optimum performance and consistent lamp position
- Full aluminum interior reflector
- Equipped with safety chain and lock/set screw to prevent trim disengagement from reflector
- 24% lead crystal lens
- UL-CUL wet location listed
- IC Lamps: 40w A-19, 75w PAR30SN
- NonIC Lamps: 75w PAR 30 SN, 100w A-19
- Note: Recessed housing NOT INCLUDED
- Overall Dimensions: 3 3/4"H x 8 3/4"W x 8 3/4"D
Specifications
COMPATIBLE HOUSINGS
P187-TG - 6" Remodel IC and Non-IC Incandescent Housing Features:
- Retrofit version of the P87-AT
- Exclusive mounting slide bars permit quick and solid mounting in ceilings
- Can be installed in ceilings from 0.5" to 1.5" thick
- IC/Non-IC peel away label for field conversion
- UL and CUL Listed for damp locations and through wiring
- Rated for 4 #12 90 degree conductors (2 in/2 out)
- Rated for 60 degree supply wired in end-of-run applications
- US Patent #5758959
- 6.625" Ceiling Opening
- 7.825" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P87-ATQC - 6" New Construction Quick Connect Air-Tight IC/Non-IC Incandescent Housing Features:
- Quick-connects allow simple installation of 12-20 AWG wire, without the need for wire nuts
- New Construction
- Air Tight IC and Non-IC
- Meets Washington State Energy Code requirements-P8587-01 Accessory Ceiling Gasket or caulking around plaster frame opening
- UL and CUL Listed for damp locations and through wiring
- Integral Romex clamp
- Tool-less can adjustment for varying ceiling thickness
- Full reflector design eliminates light leaks
- Rated for 8 #12 90 degree conductors (4 in/4 out)
- US Patent #5758959, 5857766, 6004011
- Slotted, interlocking bar hangers securely span 24" T-bar spacing
- Can be installed in ceilings from 0.5" to 2.5" thick
- 6.875" Ceiling Opening
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P87-AT - 6" 6" New Construction Air-Tight IC/Non-IC Incandescent Housing Features:
- New Construction
- Air Tight IC and Non-IC
- Meets Washington State Energy Code requirements-P8587-01 Accessory Ceiling Gasket or caulking around plaster frame opening
- UL and CUL Listed for damp locations and through wiring
- Integral Romex clamp
- Tool-less can adjustment for varying ceiling thickness
- Full reflector design eliminates light leaks
- Rated for 8 #12 90 degree conductors (4 in/4 out)
- US Patent #5758959, 5857766, 6004011
- Can be installed in ceilings from 0.5" to 2.5" thick
- Slotted, interlocking bar hangers securely span 24" T-bar spacing
- 6.875" Ceiling Opening
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P821-AT - 6" High Wattage New Construction/Air Tight IC Incandescent Housing Features:
- Allows for high wattage in insulated ceilings up to 150watts
- Meets Washington State Energy Code requirements-P8587-01 Accessory Ceiling Gasket
- UL and CUL Listed for damp locations and through wiring
- Socket mounts to trim for consistent lamp position
- Integral Romex clamp
- Integral nailer and T-bar mounting clamp
- Rated for 8 #12 90 degree conductors (4 in/4 out)
- US Patent # 5758959, 5857766, 6004001
- Can be installed in ceilings from 0.5" to 2.5" thick
- Spans 24" T-bar spacing
- 6.875" dia. Ceiling Opening
- 8.375" x 13" Plaster Frame
- 7.625" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P83-26ICAT - 6" New Construction IC/Air-Tight Compact Fluorescent Housing - Energy Star Compliant Features:
- Quick-connects allow simple installation of 12-20 AWG wire, without the need for wire nuts
- 120v NPF electronic ballast
- Meets requirements for Enery Star
- Meets California T-24 requirements
- Not rated for through branch, but can be "daisy-chained"
- One 4-pin triple or spiral 26w compact fluorescent lamp vertically mounted
- Spans 24" T-bar spacing
- Can be installed in ceilings from 1/2" to 2" thick
- Ceiling opening: 6-7/8"
- Plaster frame: 7-7/8" x 10-3/4"
- Recessed depth: 7-1/2"
- Pryouts: 1/2" and 3/4"
Specifications
P83-ICAT - Energy Star 6" New Construction IC/Air-Tight Compact Fluorescent Housing Features:
- New Construction & Air Tight, IC Energy Star
- Ballast: 120 Volt Electronic
- NPF
- One 4-pin quad or triple 18watt compact fluorescent lamp vertically mounted
- Meets requirements for Energy Star
- Not rated for through branch, but can be "daisy-chained"
- Spans 24" T-bar spacing
- Can be installed in ceilings from 0.5" to 2" thick
- 6.875" Open Ceiling
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P83-AT - 6" Electronic HPF New Construction IC/Air-Tight Compact Flourescent Housing Features:
- New Construction & Air Tight, IC
- Ballast: 120 Volt Electronic
- HPF
- One 4-pin quad or triple 13watt compact fluorescent lamp vertically mounted
- Meets Washington State Energy Code requirements-P8587-01 Accessory Ceiling Gasket
- Integral Romex Clamp
- Spans 24" T-bar spacing
- Rated for 8 #12 90 degree conductors (4 in/4 out)
- Can be installed in ceilings from 0.5" to 2" thick
- 6.875" Open Ceiling
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P88-ICAT - 6" New Construction IC/Air-Tight Compact Fluorescent Housing:
- New Construction & Air Tight, IC
- Ballast: 120 Volt Electronic
- NPF
- One 4-pin quad or triple 18watt compact fluorescent lamp vertically mounted
- Not rated for through branch, but can be "daisy-chained"
- Spans 24" T-bar spacing
- Can be installed in ceilings from 0.5" to 2" thick
- 6.875" Open Ceiling
- 7.875" x 10.75" Plaster Frame
- 7.5" Recessed Depth
- 0.5" and 0.75" Pryouts
Specifications
P821-FB - 6" Incandescent Non-IC Firebox Features:
- Non-IC rated
- UL and CUL Listed for damp location and through branch wiring
- UL Classified to maintain fire ratings of 1 hour or less for UL P200 and P500 series roof/ceiling designs
- UL Classified to maintain fire ratings of 2 hours or less for UL D200, D500, G200, G500, L200 and L500 series floor/ceiling designs
- Acoustically tested to maintain STC Ratings of L500 floor/ceiling assemblies
- IC box accessory available
- Fits into 2 x 10 construction
- 6.875" Ceiling Opening
- 8.1875" Recessed Depth
- 12.325" x 9.5626" Plaster Frame
- 0.5" and 0.75" Pryouts
Specifications
P821-FBFC - 6" Air Tight Incandescent Firebox Features:
- Air-Tight
- Shipped with hardware to install bar hangers to furring channels
- Non-IC rated
- UL and CUL Listed for damp location and feed through wiring
- UL Classified to maintain fire ratings of 1 hour or less for all UL P500 series fire rated ceiling/floor assemblies
- UL Classified to maintain fire ratings of 2 hours or less in all UL D200, G200, L200, D500, G500 and L500 series fire rated ceiling assemblies
- Acoustically tested to maintain STC Ratings of L500 floor/ceiling assemblies
- Insulation must be kept at least 3" away from housing
- Fits into 2 x 10 construction
- 6.875" Ceiling Opening
- 8.1875" Recessed Depth
- 12.325" x 9.5626" Plaster Frame
- 0.5" and 0.75" Pryouts
Specifications
P62-FB - 6" 2-Hour Fluorescent Non-IC Firebox for Recessed Lighting Features:
- Non-IC rated
- Air-tight
- Fits into 2 x 10 construction
- UL classified to maintain up to a two hour fire rating in UL L500 & G531 fire rated ceiling assemblies
- All trims accept 26W or 32W triple tube or spiral 4-pin compact fluorescent lamps unless stated otherwise
- Includes hardware for mounting to furring channels
- Ceiling Opening: 6-7/8"
- Recessed Depth: 8-9/16"
- Plaster Frame: 12-3/8" x 9-9/16"
- Pryouts: 1/2" and 3/4"
Specifications
P183-EB - 6" Remodel IC Compact Fluorescent Housing Features:
- Retrofit version of the P83-AT
- Ballast: 120 Volt Electronic
- HPF
- Exclusive slide mounting bars permit quick and solid mounting in ceilings
- Can be installed in ceilings from 0.5" to 1.5" thick
- UL and CUL Listed for damp locations and through wiring
- Rated for 4 #12 90 degree conductors (2 in/2 out)
- Rated for 60 degree supply wires in end of run applications
- One 4-pin quad or triple 13watt compact fluorescent vertically oriented
- 6.625" Ceiling Opening
- 7.5" Recessed Depth
- 0.5" Pryouts
Specifications
P183-26EB - 6" Energy Star Remodel IC Compact Fluorescent Housing Features:
- 120V NPF electronic ballast
- Meets requirements for Energy Star
- Meets California T-24 requirements (requires P8593-01 Kit for Air-Tight)
- Exclusive slide mounting bars permit quick and solid mounting in ceilings
- Can be installed in ceilings from 1/2" to 1-1/2" thick
- UL and CUL listed for damp locations and through wiring
- Rated for 4 #12 90 degree conductors (2 in/2 out)
- Rated for 60 degree supply wires in end of run applications
- One 4-Pin Triple or spiral 13w compact fluorescent vertically mounted
- Ceiling opening: 6-5/8"
- Recessed depth: 7-1/2"
- Pryouts: 1/2"
Specifications
Back to top
We Now Ship to Canada!
Ships to Canada
