5" Incandescent Open Shower Recessed Light Trim in White

Recessed lighting has become the preferred lighting in today's homes and businesses for many good reasons. Their versatility allows them to be placed throughout your ceiling for unobtrusive general lighting, positioned above the sink for task lighting, or aimed toward artwork as the perfect accent lighting.

FEATURES | COMPATIBLE HOUSINGS

---

FEATURES

• White finish
• Metal flange
• IC/Non-IC Lamp: 50w PAR 30 shortneck (not included)
• Wet location listed
• Note: Recessed housing NOT INCLUDED
• Outside diameter: 6.125"

---

COMPATIBLE HOUSINGS

P84-AT - 5" Incandescent Housing for Recessed Lighting: Air Tight IC and Non-IC Features:

• New Construction
• Air Tight IC and Non-IC
• Notched mounting frame for easy alignment
• Can be installed in ceilings from 0.5" to 2" thick
• Nail grip bar hangers accommodate up to 24" on center ceiling joists
• Slotted interlocking bar hangers provide solid mounting on 24" centers
• Locking feature to secure housing
• Integral T-bar clamps
• Integral Romex clamps
• UL & CUL listed for damp locations and through wiring
• Rated for 8 #12 90 degree conductors (4 in/4 out)
• Trims are easy-in and push-lock into place
• Shallow profile (5.5") for 2 x 6 construction
• Adjustable lamp position
• Meets Washington State Energy Code requirements-P8584-01 Assembly Ceiling Gasket
• 5.25" Ceiling Opening
• 7.875" x 10.75" Plaster Frame
• 5.5" Recessed Depth
• 0.5" and 0.75" Pryouts

Specifications

P85-AT - 5" Incandescent New Construction IC/Air-Tight Housing Features:

• New Construction Air-Tight IC
• Rated for direct contact with ceiling insulation
• Trims are Easy-in and push-lock into place
• Notched mounting frame for easy alignment
• Slotted, interlocking bar hangers provide solid mounting on 24" centers
• P85-AT meets Washington State Energy Code requirements-P8584-01 Accessory Ceiling Gasket
• Nail grip bar hangers accommodate 24" on center ceiling joist or T-bars
• Locking feature to secure housing in place
• Integral T-bar clamps on bar hangers
• Complete with grounding pigtail
• UL and CUL Listed for damp locations and through wiring
• Integral Romex clamps
• Rated for 8 #12 90 degree conductors (4 in/4 out)
• Can be installed in ceilings from 0.5" to 2" thickness
• 5.25" Ceiling Opening
• 8.375" x 13" Plaster Frame
• 7.625" Recessed Depth
• 0.5" and 0.75" Pryouts

Specifications

P85-FB - 5" Incandescent New Construction FireBox for Recessed Lighting Features:

• Non-IC rated
• UL Classified to maintain fire ratings of 1 hour or less for UL P200 and P500 series roof/ceiling designs
• UL Classified to maintain fire ratings of 2 hours or less for UL D200, D500, G200, G500, L200 and L500 series floor/ceiling designs
• Fits into 2 x 10 construction
• 5.25" Ceiling Opening
• 8.8125" Recessed Depth
• 8.375" x 13" Plaster Frame
• 0.5" and 0.75" Pryouts

Specifications

P85-TG - 5" Non-IC Incandescent Housing for Recessed Lighting Features:

• New Construction Non-IC
• Rated for direct contact with ceiling insulation
• Trims are Easy-in and push-lock into place
• Notched mounting frame for easy alignment
• Slotted, interlocking bar hangers provide solid mounting on 24" centers
• P85-AT meets Washington State Energy Code requirements-P8584-01 Accessory Ceiling Gasket
• Nail grip bar hangers accommodate 24" on center ceiling joist or T-bars
• Locking feature to secure housing in place
• Integral T-bar clamps on bar hangers
• Complete with grounding pigtail
• UL and CUL Listed for damp locations and through wiring
• Integral Romex clamps
• Rated for 8 #12 90 degree conductors (4 in/4 out)
• Can be installed in ceilings from 0.5" to 2" thickness
• 5.25" Ceiling Opening
• 8.375" x 13" Plaster Frame
• 7.625" Recessed Depth
• 0.5" and 0.75" Pryouts

Specifications

P184-TG - 5" Remodel IC and Non-IC Incandescent Housing for Recessed Lighting Features:

• Locking clips (furnished) permit quick mounting in ceiling
• Can be installed in ceilings from 0.5" to 1.75" thick
• UL and CUL Listed for damp locations
• Rated for 4 #12 90 degree conductors (2 in/2 out)
• Rated for 60 degree supply wired in end-of-run applications
• Trims are easy-in and push-lock into place
• Shallow profile (5.5") for 2 x 6 construction
• 5.125" Ceiling Opening
• 5.5" Recessed Depth
• 0.5" Pryouts

Specifications

P185-TG - 5" Remodel Non-IC Incandescent Housing for Recessed Lighting Features:

• Locking clips (furnished) permit quick mounting in ceiling
• can be installed in ceilings 0.5" to 1.75" thick
• Rated for 4 #12 90 degree conductors (2 in/2 out)
• Rated 60 degree supply wires in end-of-fun applications
• 5.125" Ceiling Opening
• 7.5" Recessed Depth
• 0.5" Pryouts

Specifications

Back to top